If the fan of a force heat unit does not turn on when the heat is supposed to turn on, will the gas heater...?
The enterprise I live in has fan-forced heating that consists of a fan blower and a gas heater. When the thermostat goes on, the fan and gas part turns on. If the circut for the fan blower is cut off when the thermostat kicks on and the heat is obliged to be on, will the gas unit burn out because the fan isn't blowing?
I will try and elucidate how a gas furnace works. When there is call for heat, your Thermostat will put 24volts to the furnace. Heat will then recoil on. when the heat exchanger gets to a certain temperature then the fan will boot on. After the room temperature is satisfied it will punt the heat off.The fan will run for approx. 30 seconds all the way to 5 minutes. The judgement the fan stays on is to make sure all the heat has been removed from the heat exchanger. If at anytime the fan does not rebound on the furnace will go off on what is called high heat. There is a cover device that is in the furnace called a principal limit switch that will cut off the gas supply and show up the fan on. By turning the fan on, It will help cool off the heat exchanger to keep it from getting damaged. If the fan margin is not working then I would have it fixed. The high limit is only a sanctuary device. They have been known to fail causing bill to the furnace. You will need to have it fixed. A cracked heat exchanger is a larger cause of carbon monoxide poisoning. Not a careful thing to have. I hope this is the answer you are looking for. Virtue luck





